Search found 55 matches

by Antonio Espada
20 Jul 2011, 11:01
Forum: Class Rules
Topic: Single Panel Molded Sails
Replies: 90
Views: 110515

Re: Single Panel Molded Sails

We have completely in acoordance with all topics of your interventions...
Pls see the PRIVATE MESSAGES. We have send you a message a week ago....

Antonio.
by Antonio Espada
09 Jul 2011, 00:39
Forum: Class Rules
Topic: Single Panel Molded Sails
Replies: 90
Views: 110515

Re: Single Panel Molded Sails

If the general membership votes to allow moulded sails, IMHO, the rules regarding sails should be re-written to specify allowable materials, specific requirements Pls read the IMM of ISAF.... page number 96 about Ply and others...(you say that this Manual exists? Are you read?) What is the need to ...
by Antonio Espada
04 Jul 2011, 22:54
Forum: Class Rules
Topic: Single Panel Molded Sails
Replies: 90
Views: 110515

Re: Single Panel Molded Sails

I have to warn you all I'm going to say next, is "politically incorrect" but I will tell their personal capacity: 1 - RoyL, assumes (and warns) the outcome of the consultation Zvonko ... 2 - RoyL, was from 2006 to 2009 to include inthe rulebook prohibitive resolution 2003 (which incidentally also di...
by Antonio Espada
24 Jun 2011, 16:48
Forum: Class Rules
Topic: Interpretation of IOM CR: rudders arrangement
Replies: 6
Views: 12531

Re: Interpretation of IOM CR: rudders arrangement

¿No answer to my questions?

Wath is the reason that any person protests for a resolution made by a external IOMICA instance, contrary to the oficial issued from Robert Grubisa, if this instance has exactly the same level of profesionality that Robert?

Or is it a question of political positions?
by Antonio Espada
23 Jun 2011, 23:50
Forum: Class Rules
Topic: Single Panel Molded Sails
Replies: 90
Views: 110515

Re: Single Panel Molded Sails

With all due respect to all previous comments, I feel to be in complete disagreement with the majority: Facts: 1 - Sails have passed the measurement control of the championship 2 - No one filed any protest Conclusion: No place or rezoning, or anything similar disqualifications In the event that any ...
by Antonio Espada
15 Mar 2011, 12:34
Forum: Class Rules
Topic: Interpretation of IOM CR: rudders arrangement
Replies: 6
Views: 12531

Re: Interpretation of IOM CR: rudders arrangement

I speak solely as a measurer. The second resolution to which I referred in my previous post, is totally inconsistent not only with the first (which in my opinion was correct) but with the class rules as they are written today. An inverted T rudder built in ONE PIECE, not Arrangements is completely l...
by Antonio Espada
15 Mar 2011, 12:22
Forum: Measurement and Measurers
Topic: Dry or Waterless Measuring
Replies: 14
Views: 21248

Re: Dry or Waterless Measuring

Hi Lawrie:

Very good project and Video...

Are you the protagonist?

We send you a mail with the legal problems with the actual RuleBook... if you obtains a new text and general consense... ¡congratulations!.

Has you see the work of Roy Thompson 3-4 years ago?

Regards.
by Antonio Espada
14 Mar 2011, 18:52
Forum: Class Rules
Topic: Interpretation of IOM CR: rudders arrangement
Replies: 6
Views: 12531

Re: Interpretation of IOM CR: rudders arrangement

I understand that the first interpretation is not according to the new rules 2011 ???

The second resolution is signed by Val Provoost and Remi Bres (from IRSA)...Not by Robert Grubisa...

Pls informs that IRSA has the posibility to modify a resolution of our Vice-chairman (Technical).
by Antonio Espada
02 Oct 2010, 21:23
Forum: Class Rules
Topic: Interpretation of IOM CR: rudders arrangement
Replies: 6
Views: 12531

Re: Interpretation of IOM CR: rudders arrangement

Is posible see a graphic of the two proposals?
by Antonio Espada
01 Oct 2009, 13:45
Forum: General IOM
Topic: IOM in ISAF
Replies: 198
Views: 157271

Val Forgive me , but I think there is a misunderstanding due to my poor English always. I'll try to translate for me an explanation of my message, a native English person to avoid further misunderstandings. Anyway, I also seek compensation from you with respect to the Measurers (collective to which ...
by Antonio Espada
28 Sep 2009, 22:51
Forum: General IOM
Topic: IOM in ISAF
Replies: 198
Views: 157271

According to the International Measurer David Chivers his time is charged out to the class for attendance at Championships at £200 per day and that is from leaving his home to returning. On top of that travel, accommodation and subsistence are also paid by the class. It is for these fees, absolute...
by Antonio Espada
28 Aug 2009, 07:29
Forum: General IOM
Topic: IOM in ISAF
Replies: 198
Views: 157271

In my post, had specific questions.
Your reply "ethereal" says nothing.
Can you make a positive or negative contribution?
by Antonio Espada
28 Aug 2009, 00:14
Forum: General IOM
Topic: IOM in ISAF
Replies: 198
Views: 157271

Back from my hollidays I see this discussion of ISAF YES ...ISAF NO ... RoylL: Can I ask for what your interest is in not in ISAF, and especially the reasons for it? What is the universe you contemplate outside ISAF?. In the time it has been Technical VC, do you know what is the eligibility? Regards.
by Antonio Espada
29 Jul 2009, 05:42
Forum: Class Associations and Class Management
Topic: Election Reform
Replies: 35
Views: 35967

The difference between registered and certified, is that "someone" has "seen" the object of the class, which is nothing less than "a boat of Class 1M". I can registered,( for example), my project of buying a lintel, and should not be entitled to vote, until he is able to navigate to it (unless you h...
by Antonio Espada
28 Jul 2009, 10:04
Forum: Class Associations and Class Management
Topic: Election Reform
Replies: 35
Views: 35967

Bruce: I am very grateful to customize your response to me, but I am only a simple sailor in the class (which is also a measurer). Completely agree on almost everything, and I hope the debate will produce the best result for the class. In short, I have a new Consultation to VC Technical imn order to...
by Antonio Espada
27 Jul 2009, 22:25
Forum: Class Associations and Class Management
Topic: Election Reform
Replies: 35
Views: 35967

Thanks Lester.
Produced another impression.
For me personally, I would like to see both contribute their ideas to the new phase starts.
Sincerely
by Antonio Espada
27 Jul 2009, 21:42
Forum: Class Associations and Class Management
Topic: Election Reform
Replies: 35
Views: 35967

I was puzzled with the response of Bruce, and developing a range of questions ... but since we already have a new Chairman, the question boils down to the next, they immediately put together a RoyL and Bruce: How democratic system(other than the possible 3) get the votes that gave Bruce winner? Than...
by Antonio Espada
26 Jul 2009, 17:57
Forum: Class Associations and Class Management
Topic: Election Reform
Replies: 35
Views: 35967

The first apologize if I offended anyone.

Well I can not agree on "one person one vote" and explain why.
We are not a country.
We are simply an association of “ownersâ€
by Antonio Espada
25 Jul 2009, 20:04
Forum: Class Associations and Class Management
Topic: Election Reform
Replies: 35
Views: 35967

Dear Bruce and Roy: Only 2 years ago that I am in Class 1M and 1 that I connect to the forum. My first intervention was to ask why nobody was ever order in the endless discussions on every word of the regulations were being discussed "democratically" on the web ... Then I tried to clarify the issue ...
by Antonio Espada
14 Jul 2009, 16:15
Forum: Class Associations and Class Management
Topic: Results of 2009 AGM
Replies: 41
Views: 45029

Therefore, for want of data from BAR, CAN and MLT, that the IOMICA Secretary is asking for, by applying the usual procedure, the results of 2009 are as follows : I am amazed with what I read ... Is not the term was over in Barbados for the World Championship? What kind of democracy are we talking a...
by Antonio Espada
13 Jul 2009, 23:48
Forum: Class Associations and Class Management
Topic: Results of 2009 AGM
Replies: 41
Views: 45029

I apologize to all my boldness ... What the constitution says IOMICA on how the votes are counted? I see that all members of the previous executive voted for continuity ... (for chairman). In my point of view, be strictly applied to read what the constitution of IOMICA say. And if there is to be a c...
by Antonio Espada
11 Jul 2009, 22:42
Forum: Class Associations and Class Management
Topic: Results of 2009 AGM
Replies: 41
Views: 45029

With all my respect ... At no point, I was able to see the vote that each candidate has obtained. It's so complicated to publish EACH OF VOTES FOR EACH ANC, so that each ANC can also verify that their votes have been properly applied?. The concealment of the results, it merely feeds the doubts about...
by Antonio Espada
03 Jul 2009, 12:01
Forum: Measurement and Measurers
Topic: MEASURER IN CHARGE AT BARBADOS WORLD CUP
Replies: 16
Views: 24326

I can, now that it has completed the world cup who have been those that have measured the championship? I saw a picture with a template to measure Sails: Is there any template approved by IOMICA?. I hope this is not a template has been proposed as a maximum in this forum , because that would like to...
by Antonio Espada
01 Jun 2009, 10:02
Forum: Class Rules
Topic: G.3.4 ON RULEBOOK
Replies: 38
Views: 36679

Val: At no point of the ISAF rules determining which kinds of rules have to be incomprehensible, or not clear. Neither state that what is measured in an event can not be controlled in the measurement form at fundamental measurement. Why 1M, there are rules that limit in both directions?. For example...
by Antonio Espada
31 May 2009, 12:16
Forum: Class Rules
Topic: G.3.4 ON RULEBOOK
Replies: 38
Views: 36679

I note the following: With the current wording of the regulation and measurement sheet, a certificate of measurement is limited to being merely an administrative formality. If a rule as simple as that led to this thread in the forum, has led to many answers is that less is badly written. (Whatever t...
by Antonio Espada
29 May 2009, 10:45
Forum: Class Rules
Topic: G.3.4 ON RULEBOOK
Replies: 38
Views: 36679

Roy: My impression is that the rules have been re-writing as it has been necessary. What is the point if not keep in your measurement form of the hull as a question 6.D.2. (1) (3) that since 2004 does not apply?. (texalium) We may blinkers, but without mentioning the manufacturers, and with about 20...
by Antonio Espada
28 May 2009, 18:22
Forum: Class Rules
Topic: G.3.4 ON RULEBOOK
Replies: 38
Views: 36679

Roy:

A batten of 10mm * 5mm, and in correct position, is not a batten ?

Regards
by Antonio Espada
28 May 2009, 16:46
Forum: Class Rules
Topic: G.3.4 ON RULEBOOK
Replies: 38
Views: 36679

In order to simplify, I make the following question:

Should accept a mainsail with 3 tiny stickers of 5 * 10 mm located exactly on the leech and in proper position as if they were battens?

Please answer YES / NO ... as in the measurement form.
by Antonio Espada
27 May 2009, 16:34
Forum: Class Rules
Topic: G.3.4 ON RULEBOOK
Replies: 38
Views: 36679

Tks Lester.
by Antonio Espada
27 May 2009, 13:13
Forum: Class Rules
Topic: G.3.4 ON RULEBOOK
Replies: 38
Views: 36679

Someone can tell with the measurement form 2007 V3 in hand, which number line is not in according for a Mainsail WITH NO BATTENS, and WITH NO POPCKETS ?