3D Printed Hull

Discuss the IOM class rules and interpretations

Moderators: Pedro Egea, jeffbyerley

Post Reply
Antoine FLEURY
Posts: 3
Joined: 17 Apr 2018, 16:18
Sail number: FRA 135
Club: Spi d'OC, France
Design: CH H Detriche

3D Printed Hull

Post by Antoine FLEURY » 11 Feb 2019, 11:05

THe IOM Rules 2018 talk about "moulded" plastic, regarding to materials of the hull.
Does 3D printed Hull is convenient with the rules ?

YNESTA Joseph
Posts: 4
Joined: 08 Jun 2018, 10:03
Sail number: FRA 281
Club: 13008 La CIOTAT
Design: BRITTPOP

Re: 3D Printed Hull

Post by YNESTA Joseph » 11 Nov 2019, 18:50

RC D.2.1 (a) (8) D 2.4 (a)

The new building materials have arrived for a long time and leave a doubt about their uses.
In construction 3D printer several product are offered:
the meal
The ABS
Polyamide powder
Alumide powder
Liquid resin
Wax
Metallic powders
Titanium
AluminumPrecious metals
or are the rules cited above for the use of these new materials, which are allowed ??

Thank you

Joseph YNESTA (technical director of IOM France)

Thank you to provide an answer otherwise I ask myself the question of what is the purpose of this forum which many topics have no answers;

YNESTA Joseph
Posts: 4
Joined: 08 Jun 2018, 10:03
Sail number: FRA 281
Club: 13008 La CIOTAT
Design: BRITTPOP

Re: 3D Printed Hull

Post by YNESTA Joseph » 12 Nov 2019, 09:01

YNESTA Joseph wrote:
11 Nov 2019, 18:50
RC D.2.1 (a) (8) D 2.4 (a)

The new building materials have arrived for a long time and leave a doubt about their uses.
In construction 3D printer several product are offered:
the meal
The ABS
Polyamide powder
Alumide powder
Liquid resin
Wax
Metallic powders
Titanium
AluminumPrecious metals
or are the rules cited above for the use of these new materials, which are allowed ??

Thank you

Joseph YNESTA (technical director of IOM France)

Thank you to provide an answer otherwise I ask myself the question of what is the purpose of this forum which many topics have no answers;
I forgot to mention that in questions and answers, we only talk about authorized pellets and nothing about the threads for 3D printers

Hiljoball
Posts: 271
Joined: 06 Jan 2006, 00:47
Sail number: CAN 307
Design: V8
Location: CAN

Re: 3D Printed Hull

Post by Hiljoball » 12 Nov 2019, 15:03

Hello Joseph.

You raise some good questions, but this forum is not an official channel for getting the correct and binding answers.

The correct process is for the Class Secretary of IOM-France to send your question to the IOMICA Technical Committee for an interpretation.

John
John Ball
CRYA #895
IOM CAN 307 V8
In my private capacity

YNESTA Joseph
Posts: 4
Joined: 08 Jun 2018, 10:03
Sail number: FRA 281
Club: 13008 La CIOTAT
Design: BRITTPOP

Re: 3D Printed Hull

Post by YNESTA Joseph » 14 Nov 2019, 14:56

Thank you for your answer, I act differently.

Post Reply