Carbon fibre sail battons

Discuss IOM design, building an IOM, information on suppliers, tuning an IOM, results of recent events, etc

Moderator: Pedro Egea

Post Reply
dgp1957

Carbon fibre sail battons

Post by dgp1957 » 04 Feb 2009, 12:36

guys, one of the guys at my club is thinking of buying some sails for his boat, they are advertised as hanving carbon fibre battons, these arent illegal are they?

Thanks
David

Barry Fox CAN262
Posts: 354
Joined: 21 Apr 2007, 17:54
Sail number: CAN 46
Club: VMSS
Design: V8
Location: Vancouver Island, BC, Canada

Post by Barry Fox CAN262 » 06 Feb 2009, 08:26

The class rules say you have to have them but don't specify what they can be made of. So, if you apply previous discussions of mast fitting construction then we have a required item that must be made from nothing.

The ERS says (if I read it right):

H.6 Checking Materials
Unless specifically prescribed by the class rules, materials are not subject to certification control.

So if that applies then they can be made of anything, maybe. I have sails from reputable sail makers that have battens made from all kinds of different material including a couple of different versions of CF.
Barry Fox
CAN 46
Vancouver Island, BC, Canada

ole_peder
NOR NCA Officer
Posts: 140
Joined: 18 Nov 2003, 12:42
Sail number: NOR 44
Design: NOR 44
Location: NOR 44
Contact:
Norway

Post by ole_peder » 06 Feb 2009, 18:38

With previous discussions in mind I would not use CF battens. I have a feeling it would open yet another can of worms.

There is no reasons to use CF battens in an IOM sail other than it looks nice and seems to be "high tech"

The only place one can justify using CF is in the keel and here it is legal. All other places the CF can be replaced with glassfibre.

So my advice is keep away from it, you don't need it
Ole Peder Bjørsom
Chairman NOR NCA

RoyL
Posts: 707
Joined: 15 Dec 2003, 21:03

Post by RoyL » 06 Feb 2009, 19:14

Carbon Fiber can be used in the keel and the rudder and under the newly voted in rule change, rig fittings. Mast tubes (if not permanently fixed to the boat) can also be carbon fiber. As to battens, nothing in the rules specifies batten materials, so as is the usual problem with our closed class rules, technically it could be argued that no material is permitted.

Practice has suggested that no one particularly cares about batten materials and they have been effectively unrestricted. Hard for me to see how carbon fiber battens would be the right material, way too stiff in my opinion, but also don't think it should be illegal to use.

Might be another thing to propose at the upcoming AGM to clean up the rules.

User avatar
Olivier Cohen
IOMICA Chairman
Posts: 436
Joined: 02 Dec 2004, 17:11
Sail number: FRA 100
Design: Venti
Location: Nantes / France
France

Post by Olivier Cohen » 07 Feb 2009, 13:59

RoyL wrote: Mast tubes (if not permanently fixed to the boat) can also be carbon fiber.

?????
IOMICA Chairman

RoyL
Posts: 707
Joined: 15 Dec 2003, 21:03

Post by RoyL » 07 Feb 2009, 16:02

Sorry, I meant to say "main sheet post", and English is my native language!

Steve Landeau
Posts: 256
Joined: 26 Nov 2003, 07:25
Location: USA 12

Post by Steve Landeau » 07 Feb 2009, 20:07

OC44 wrote:
RoyL wrote: Mast tubes (if not permanently fixed to the boat) can also be carbon fiber.

?????
I'm sure Roy meant mainsheet post tubes.... 8)
Steve Landeau
AMYA 10859
IOM USA 112
Finn USA 112
Cal 25 #548

Don Case
Posts: 53
Joined: 16 Sep 2008, 05:09

Post by Don Case » 08 Feb 2009, 18:10

RoyL wrote:Carbon Fiber can be used in the keel and the rudder and under the newly voted in rule change, rig fittings.
"Rig fittings" (Just to double check 'cause I'm a belt and suspenders kind of guy) would include crane, vang(not rigid) and gooseneck? This would mean I could use some of my US1M parts.
Thanks
Don
Don Case
Can 271
Vancouver Island B.C.

Barry Fox CAN262
Posts: 354
Joined: 21 Apr 2007, 17:54
Sail number: CAN 46
Club: VMSS
Design: V8
Location: Vancouver Island, BC, Canada

Post by Barry Fox CAN262 » 09 Feb 2009, 06:01

All the things that you used to be able to make from nothing can now be made from anything.
Barry Fox
CAN 46
Vancouver Island, BC, Canada

Post Reply