Fin airfoils

Discuss IOM design, building an IOM, information on suppliers, tuning an IOM, results of recent events, etc

Moderator: Pedro Egea

Post Reply
Robert H
Posts: 23
Joined: 21 Oct 2005, 17:21
Location: USA

Fin airfoils

Post by Robert H » 09 Jun 2008, 02:51

I have found only one commercially available fin that lists its airfoil , Anders Wallin has one for sale: 0006( 6%t/c).
Sails ect lists 6, 6.5 and 7% for t/c, but no airfoil.
What other airfoils are being used commercially or just by home builders for fins and rudders?

Thanks, Rob
Robert Harik

awallin
Posts: 624
Joined: 18 Nov 2003, 06:31
Location: FIN 36
Contact:

Post by awallin » 25 Aug 2008, 12:32

For bulbs we have been using the NACA 0010-34 which also has max camber at 40% but is a little different from the standard 4-digit series.

Measuring some commercial fins I would say the 0010-34 is pretty close to a number of commercial fins.

There's some more info on bulb shapes on Lester's site:
http://www.onemetre.net/Design/Bulbsize/BulbSize.htm

Anders

Post Reply