Widget Receiver

Discuss IOM design, building an IOM, information on suppliers, tuning an IOM, results of recent events, etc

Moderators: GaryBoell, Pedro Egea

Post Reply
Colin Davies
Posts: 10
Joined: 22 Nov 2013, 19:24

Widget Receiver

Post by Colin Davies » 28 Feb 2014, 21:31

I have a Widget with a RMG winch, i would like to replace the receiver,can anyone tell me if changing the Rx will it affect the settings of the Winch.


Colin :(

Hiljoball
Posts: 271
Joined: 06 Jan 2006, 00:47
Sail number: CAN 307
Design: V8
Location: CAN

Re: Widget Receiver

Post by Hiljoball » 28 Feb 2014, 21:55

Changing the Rx should not have any effect on the RMG and its settings. Changing Transmitter may have an effect, if you have used the Tx programming to set limits (this is not recommended in the manual and so should not be an issue to the RMG) . Also applying servo reverse to the Tx for that channel will affect the RMG, according to its manual.

John
John Ball
CRYA #895
IOM CAN 307 V8
In my private capacity

Colin Davies
Posts: 10
Joined: 22 Nov 2013, 19:24

Re: Widget Receiver

Post by Colin Davies » 28 Feb 2014, 22:41

Many thanks for your reply John.i did not think it would have any effect on the RMG but i just wanted to double check it


Regards
Colin

Post Reply